Detalles del producto
Lugar de origen: PORCELANA
Nombre de la marca: Tankii
Certificación: ISO9001
Número de modelo: Cuni44
Pago y términos de envío
Cantidad de orden mínima: 5 kilos
Precio: 25-37USD/KG
Detalles de empaquetado: Caso
Tiempo de entrega: 10-15 días
Condiciones de pago: T/T, Unión Occidental
Capacidad de la fuente: 1000 kg/mes
Porción: |
Pedido pequeño aceptado |
Muestra: |
Muestra disponible |
Tipo de conductor: |
Sólido |
Material aislante: |
Desnudo |
Solicitud: |
Calentador de agua, calefacción, aire acondicionado o refrigerador, tubo de agua |
Estándar: |
GB/T |
Porción: |
Pedido pequeño aceptado |
Muestra: |
Muestra disponible |
Tipo de conductor: |
Sólido |
Material aislante: |
Desnudo |
Solicitud: |
Calentador de agua, calefacción, aire acondicionado o refrigerador, tubo de agua |
Estándar: |
GB/T |
CuNi44 Alloy wire use for under floor heating cable.
Product Description
CuNi2 alloy wire: low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products. The materials produced by our company have the characteristics of good resistance consistency and superior stability. We can supply all kinds of round wire, flat and sheet materials.
Chemical Content, %
| Ni | Mn | Fe | Si | Cu | Other | ROHS Directive | |||
| Cd | Pb | Hg | Cr | ||||||
| 2 | - | - | - | Bal | - | ND | ND | ND | ND |
Mechanical Properties
| Max Continuous Service Temp | 200ºC |
| Resisivity at 20ºC | 0.05±10%ohm mm2/m |
| Density | 8.9 g/cm3 |
| Thermal Conductivity | 100(max) |
| Melting Point | 1280ºC |
| Tensile Strength,N/mm2 Annealed,Soft | 140~310 Mpa |
| Tensile Strength,N/mm2 Cold Rolled | 280~620 Mpa |
| Elongation(anneal) | 25%(min) |
| Elongation(cold rolled) | 2%(min) |
| EMF vs Cu, μV/ºC (0~100ºC) | -8 |
| Micrographic Structure | austenite |
| Magnetic Property | Non |
![]()
![]()
![]()